Of course there are options when it comes to coil changing, the standard general BVC coil or the nicotine salts BVC general coil, both are a breeze to change and install. 1st remove the pod from the unit and turn it upside down, Next remove the inside chimney unit, Nwxt screw in your chosen replacement coil. Next, replace the chimney unit with attached coil, Next reinsert the pod by pushing the pod back into the Spryte until it clicks.
Please Note: when inserting a new coil and filling the pod, always let the device stand for 5 minutes to allow the coil to become saturated. This is called priming the coil, and this will help avoid dry hits and prolong the life of the coil.
Below is a 5 step coil changing layout chart for your reference.
Refilling the Aspire Spryte pod is made really easy, Just remove the pod from the device. Next turn the pod upside down and remove the silicone plug from the 4.6 mm filling hole. Next Fill the pod with your favorite e-liquid, and replace the silicone plug securely into place. This will seal and make the pod airtight. Finally Replace the pod in the device by pushing down until it clicks into place, and it’s ready.
Below is a 5 step easy to use filling chart for the Aspire Sprite AOI.
Charging your Aspire Spryte is also simplified. First plug in the provided micro usb cable in the base of the Spryte device, attach the other end to a proper power supply. The maximum charge current is 1000 mAh. When attached to the usb with the power on the LED lights on the Spryte will flash blue and red three times, when fully charges the LED lights will flash blue and red twenty times then turn itself off.
Below is a Poster showing how to correctly charge your Aspire Spryte All in one unit.