- Height: 70 mm
- Width: 31.5 mm
- Thickness: 29.6 mm
- Battery: 1600 mah internal
- Connection: 510 threaded
- Materials: Stainless steel, Carbon fiber
- Display: Bottom wattage display,color coded LED light indicator
- Charging: Micro USB charger port
- Fire Button: 10 second continuous fire time
- Modes: 6 pre-set VV modes
Sleek, and simple with a slim line design. Durable materials allow you to take the Aspire Reax mod everywhere you go, it fits perfectly in a hand bag or your pocket. With several color options to choose from and 6 pre-set wattage settings, you can personalize your own tailored vaping experience. We have included a diagram below showing and labeling all the parts components.
Also included below is a product detentions and measurement chart for your reference. You will notice the chart shows the exact parameter measurements, battery information, and firing time.
On the bottom under base of the device you will notice the bottom wattage display, the bottom wattage display will light the proper corresponding output power value. 8 watts, 10 watts, 12 watts, 14 watts, 16 watts, and bypass mode. Included below is an image and visual example.
Please note: The output wattage can only be adjusted by the connected coil resistance. When the coil resistance detected is equal or higher than 1.0 ohm it can be adjusted to your satisfaction. When the connected coils resistance is less than 1.0 ohm the output mode will adjust to bypass automatically and can not be adjusted.
The Reax mini is equipped with all the safety features Aspire is known for: Automatic cut-off, short circuit protection, low voltage protection, over charge protection, and over heat protection. Below is a diagram example explaining the safety features.
When the device is turned on, press the fire button. The light will illuminate with a color code indicating your devices current charge level. When charged above 3.8v the light will indicate green, when the charge is between 3.5 volts - 3.8 volts the light will indicate blue. When the charge drops below 3.5 volts the light will indicate red and remind you its now time to charge your device.
Charge via the Micro USB port on the front side of the device, with a maximum charge current up to 2000mA. When the provided USB cable is properly attached the LED light will flash red 3 times. When charging the device will indicate the current charge status:
- Red light: 3.5 volts or less
- Blue light: 3.5 volts - 3.8 volts
- Green light: 3.8 volts and above
Below you will see a visual example charging chart showing how to properly charge and re-charge your device.
Have you lost or damaged your owner user instruction manual? No worries, we have you covered! Click the link below and download a new copy straight from ASPIRE!
ASPIRE REAX MINI MOD USER MANUAL