Aspire Atlantis 1 replacement coil priming:
We recommend adding a few drops of your e-liquid to the coils outer feed holes before screwing it into the tank hardware, this will help "prime" the coil keeping it saturated and moist. These coils will burn when not saturated or dry fired so make sure to properly prime your coil. When using or replacing a new coil, let the tank stand for 2-5 minutes so the cotton can be saturated with liquid before firing.
Aspire's suggested wattage is 0.5 ohms = 20-30 watts. We recommend the manufacturers "low" end wattage as a starting point, always start at a low wattage and work your way up to the point you have the best user experience. On the contrary never go beyond or higher than the manufacturers recommended highest wattage setting.